Overview Of The Connections - Keba ServoOne CM-P BG1 Operation Manual

Electrical installation 1 Electrical installation
ID no.: 1400.201B.5-00
4.3

Overview of the connections

The following shows the layout of ServoOne CM-P supply unit with the corresponding
positions of connectors and terminals. For improved clarity we have added an
abbreviation to the designation for the connectors and terminals.
X1
X2
24 V DC / GND
DC Link +/-
X3
X6
X5
X7
X8
PE
Figure 4.3 Layout, ServoOne CM-P supply unit
Date: 02/2020
Operation Manual Supply Unit SO CM-P BG1+2
Abbreviation Designation
24 V DC / GND 24 V control supply output via busbars
DC Link +/- DC link supply output via busbars
X1 Connection for braking resistor
X2 24 V control supply output via terminals
X3 Cross-communication output (XC out)
X5 Relay contact (RO02), programmable
Relay contact (RO01)
X6
Digital outputs (TPO1, TPO2)
Switched-mode power supply mains input
X7
(L1, L2 / 2 x 400 V AC)
DC link supply mains input
X8
(L1, L2, L3 / 3 x 230/400/480 V AC)
PE Protective earth conductor connection
Shield connection, control cable
Table 4.1 Key to the ServoOne CM-P supply unit layout
24
Details
See Chapter 4.12
See Chapter 4.12
See Chapter 4.10
See Chapter 4.11
See Chapter 4.13
See Chapter 4.13
See Chapter 4.13
See Chapter 4.8
See Chapter 4.6
See Chapter 4.4