Advertisement
Step 3.Install Camera and Network Devices
I.
Basic Connection (Without PoE)
1)
Connect the power adaptor to the camera device.
2)
Connect the camera to the Ethernet hub using a RJ45 Ethernet cable.
II.
Power over Ethernet (PoE) Connection
1)
Connect the camera to a PoE-enabled hub via single Ethernet cable.
2)
Connect the camera to a non-PoE hub via PoE Injector.
8
Advertisement
Need help?
Do you have a question about the Fixed Dome Series and is the answer not in the manual?
Questions and answers