Brickcom Fixed Dome Series Easy Installation Manual page 5

4)
Mount the camera on the wall and position to four screw slots over the plastic anchors. Insert
the screws into the holes and use the screwdriver to tighten the screws clockwise until they are
secure.
5)
Place the dome cover back on the camera device.
3. For ceiling installation:
The user needs the four screws which are included in the product package and a screwdriver.
Mount the camera on the desired location and use the screwdriver to tighten the screws clockwise
through the four holes on each side of the device as shown below. The best place to mount the
camera is into a ceiling stud.
5