Installation Procedure; Update Instrument Software - Keysight N9030A PXA Installation Note

Signal analyzer, option nf2, noise floor extension upgrade

Hide thumbs Also See for N9030A PXA:

Table of Contents

Installation Procedure

1. Check the currently-installed version of the instrument software by pressing System, Show,

System. Look for the entry for "Instrument S/W Revision".

2. If the currently-installed instrument software revision is earlier than A.14.07, it will be

necessary to upgrade the software.

3. Even if the currently-installed instrument software revision is A.14.07 or later, Keysight

recommends that the analyzer be upgraded to the latest version of instrument software.

4. Go to the following website and determine whether or not the analyzer has the latest

instrument software already installed:

http://www.keysight.com/find/xseries_software

Installation Note N9030-90064

Table of Contents