Tighten Screw - KTM 1290 Super Duke R 2017 Setup Instructions

2 SETUP
–
Position the handlebar.
The markings of the handlebar scale are located centrally between the handle-
bar clamp.
–
Position the handlebar clamp. Mount and tighten the screws evenly.
Guideline
Screw, handlebar clamp
S01846-10
–
Position brake assembly on the handlebar.
–
Position brake assembly clamp on the handlebar.
Clamp catch engages in the combination switch.
–
Mount and tighten screws
Guideline
Remaining screws, chassis
S01847-10
–
Position clutch assembly on the handlebar.
–
Mount and tighten screw
Guideline
Remaining screws, chassis
S01848-10
–
Position the combination instrument support on the handlebar.
–
Mount screw
–
Move the combination instrument into the desired position.
–

Tighten screw

Guideline
Screw, combination instrument clamp-
ing
–
Plug in the connector
S01849-10
–
Mount and tighten the rear mirror on both sides.
S01850-10
–
Mount splash protector
Guideline
Remaining screws, chassis
S01851-10
7
.
8 .
9
but do not tighten yet.
9
.
bk
with sleeve.
bl bm
with screws
M8 20 Nm
(14.8 lbf ft)
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
M6 2 Nm (1.5 lbf ft)
bn
on license plate holder
EJOT PT ® K50x12 1 Nm (0.7 lbf ft)
4
.