Download Print this page

Mounting The Seat; Mount And Tighten Screw - KTM 250 XC TPI 2020 Setup Instructions

Advertisement

3 WORK
3.4
3.5
20

Mounting the seat

H02218-11
S03480-10
Removing the fuel tank
Danger
Fire hazard Fuel is highly flammable.
The fuel in the fuel tank expands when warm and can escape if overfilled.
Do not refuel the vehicle in the vicinity of open flames or lit cigarettes.
Switch off the engine for refueling.
Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.
If any fuel is spilled, wipe it off immediately.
Observe the specifications for refueling.
Warning
Danger of poisoning Fuel is poisonous and a health hazard.
Avoid skin, eye and clothing contact with fuel.
Immediately consult a doctor if you swallow fuel.
Do not inhale fuel vapors.
In case of skin contact, rinse the affected area with plenty of water.
Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.
Change your clothing in case of fuel spills on them.
Keep fuels correctly in a suitable canister, and out of the reach of children.
Mount the front of the seat on the two collar bushings of the
fuel tank, lower the seat at the rear, and push the seat forward.
Make sure the seat is locked in correctly.

Mount and tighten screw

Guideline
Remaining screws,
chassis
Preparatory work
Remove the seat. (
p. 19)
1
on the left side.
M6
10 Nm (7.4 lbf ft)

Advertisement

loading