3.21
Adjusting the headlight range
3.22
Installing the engine guard
3.23
Opening 2-stroke oil tank cap
The boundary between light and dark must be exactly on the
lower mark for a motorcycle with rider.
»
If the boundary between light and dark does not meet
specifications:
–
Adjust the headlight range. (
Preparatory work
–
Check the headlight setting. (
Main work
–
Loosen screw
–
Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly on the
lower mark for a motorcycle with rider (instructions on how
to apply the mark: Checking the headlight setting).
Info
V00369-10
If you have a payload, you may have to correct the
headlight range.
–
Tighten screw
–
Attach the engine guard on the frame at the rear and swing up
at the front.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
H01638-10
–
1
Fold loop
–
Turn the 2-stroke oil tank cap counterclockwise and pull it up.
E00861-10
p. 31)
p. 30)
1
.
1
.
1
.
M6
upward.
WORK 3
10 Nm (7.4 lbf ft)
31