Table of Contents
Advertisement
6-3 Body-pack Transmitter // PT-36BG2
1. Power/MUTE
1-1 Power On: Press the Power switch to turn on the
power to the transmitter.
Green light: Power on
Shut down: Keep pressing down the Power switch
and the power is off about 3 seconds later.
1-2 MUTE: After the transmitter' s power is on, pressing the
"Power Switch " will mute the microphone ;
Press the "Power Switch" again will re-activate the
microphone .
PS.: When mute function is on, the LED light will keeps flashing.
2. Frequency adjusting
2-1 Press down SET button for 3 seconds.
2-2 When frequency is displayed on screen.
(1)The 3 digits on the left of the LCD blinking , press▲or ▼keys to change the frequency
at an increment of "+/-" 1MHz . Press SET key to set.
(2)The 3 digits on the right of the LCD blinking; press▲or ▼keys to change the fre-
quency at an increment of "+/-" 0.025MHz, Press SET key to set.
PS.: keeping the▲or ▼keys pressed down makes the number change faster.
2-3 When setting your desired frequency while a preset channel is displayed on screen:
(1) Press down SET key for 3 seconds.
(2) The "Group" on the left of the LCD begin to blink; press SET key twice to display the
frequency on LCD, now adjust the frequency by the same step of (2-2 When frequency
is displayed on screen )– Point (1)~(2)".
Red light: low battery
Power/MUTE
MHz
MHz
MHz
22
Advertisement
Table of Contents
