Table of Contents
Advertisement
3. Group adjusting
3-1 Press down SET button for 3 seconds.
3-2 the group will flash.
(1)Press▲or ▼button to select a desired group (1~6). Press SET key to set.
(2)The Channel flash, Press▲or ▼button to select a desired channel. Press SET key to set.
Number of channels for each group :
Group 1→ Channel 1~21 ; Group 2→ Channel 1~22
Group 3→ Channel 1~18 ; Group 4→ Channel 1~21
Group 5→ Channel 1~21 ; Group 6→ Channel 1~21
3-3 When using a preset channel while the frequency is displayed on screen:
(1)Press down SET key for 3 seconds.
(2)The 3 digits on the left of the LCD begin to blink; press SET key twice to display the
channel on LCD, now adjust the channel by the same step of (3-2 the group will flash) –
Point (1)~(2).
4. Sensitivity adjusting
4-1 Press down SET button for 3 second. The 3 digits of frequency or channel on the left of
the LCD begin to blink.
4-2 Press the SET button four times to enter the sensitivity adjustment screen.
(1)press▲or ▼button keys to adjust the microphone sensitivity in the range of
-18~+12dB at an increment of 3dB.
(2)After the adjustment, press SET key to save the setting.
20
Advertisement
Table of Contents
