Intended Use; Test Principle; Product Overview; Screen Display - Fora Advanced pro GD40g Owner's Manual

ADVANCED pro GD40g Owner's Manual
Introduction

Intended Use

This system is intended for use outside the body (in vitro
diagnostic use) by people with diabetes at home as an aid to
monitoring the effectiveness of diabetes control. It is intended to
be used for the quantitative measurement of glucose (sugar) in
fresh capillary. It should not be used for the diagnosis of diabetes,
or screening for diabetes mellitus.
The test for hematocrit (HCT) as part of the system, is intended
for use in the in vitro quantification of packed red blood cell
volume fraction in capillary whole blood as an aid in monitoring
the status of total volume of red blood cells. The reading of HCT is
only for determination of whether the blood test sample is within
the acceptable range for the blood glucose system. It should not
be used for the diagnosis of anemia or erythrocytosis.

Test Principle

Your system measures the amount of sugar (glucose) in whole
blood. The glucose testing is based on the measurement of
electrical current generated by the reaction of glucose with the
reagent of the strip. The meter measures the current, calculates
the blood glucose level, and displays the result. The strength of
the current produced by the reaction depends on the amount of
glucose in the blood sample

Product Overview

1. Test Slot
2. MAIN Button
3. Display Screen
4. Test Strip Ejector

Screen Display

1. Blood Drop Symbol
2. Code
3. Ketone Warning
4. Test Result
5. Warning Symbol
6. Low Battery Symbol
7. Day Average
8. Memory Symbol
EN-2
(a)
5. Data Port
6. SET Button
7. Battery Compartment
(b)
9. Measurement Mode
10. Measurement Unit
11. HCT Symbol
12. HCT Result
13. Hb Symbol
14. Date/Time/Hb Result