Intended Use; Test Principle; Meter Overview - Fora COMFORT check G40 Owner's Manual

Introduction

Intended Use

This system is intended for use outside the body (in vitro
diagnostic use) by people with diabetes at home and by health
care professionals in clinical settings as an aid to monitoring the
effectiveness of diabetes control. It is intended to be used for
the quantitative measurement of glucose (sugar) in fresh whole
blood samples (from the finger, palm, forearm and upper arm).
It should not be used for the diagnosis of diabetes, or testing on
newborns.

Test Principle

Your system measures the amount of sugar (glucose) in whole
blood. The glucose testing is based on the measurement of
electrical current generated by the reaction of glucose with the
reagent of the strip. The meter measures the current, calculates
the blood glucose level, and displays the result. The strength of
the current produced by the reaction depends on the amount of
glucose in the blood sample.

Meter Overview

Side
3
2
1. Test Slot
2. Display Screen
3. Test Strip Ejector
4. M Button
5. SET Button
6. Battery compartment
EN-2
Front Back
1
4
5
6