Transferring Data - Fora Advanced pro GD40g Owner's Manual

1.
ADVANCED pro GD40g Owner's Manual ADVANCED pro GD40g Owner's Manual
2. Press MAIN to review 14-, 21- and 30- day average results stored in
each measuring mode in the order of Gen, AC, then PC. (r)
Note:
MAIN
• Press and hold for 5 seconds to exit the memory mode or
leave it without any action for 3 minutes. The device will turn off
automatically.
• If using the device for the first time, the "---" icon appears when you
recall the test results or review the average result. This indicates that
there is no test result in the memory.
• Control solution results are NOT included in the day average.
Appendix

Transferring Data

Data transmission via cable
You can use the meter with the RS-232 cable and the Health Care
Software System to view test with HCT/Hb levels on your personal
computer. To learn more about the Health Care Software System
or to obtain the RS-232 cable separately, please contact local cus-
tomer services or the place of purchase for assistance.
Data transmission via cable
i. Install the software on your computer
Download Health Care System Software and instruction
manual provided on ForaCare Suisse AG, website:
http://www.foracare.ch to your computer. Follow the
instructions to install the software on your computer.
ii. Connect the device with your computer
"PC" will appear on the display, indicating that the device is
ready to transmit data. (s)
iii. Transfer data to your computer
Follow the software on-screen instructions to transmit data.
Data transmitted will include results with date and time.
Remove the cable and the device will automatically turn off.
Note:
• When the device is connected to the PC, it is unable to perform any
blood glucose test.
EN-8