Safety Information
Read the following Safety Information throughly before using the device.
• Use this device ONLY for the intended use described in this manual.
• Do NOT use accessories which are not specified by the manufacturer.
• Do NOT use the device if it is not working properly or damaged.
• Do NOT use the equipment where aerosol sprays are being used or
where oxygen is being administered.
• This device does NOT serve as a cure for any symptoms or diseases.
The data measured is for reference only.
• Before using this device to test blood glucose, read all instructions
thoroughly and practice the test. Carry out all the quality control
checks as directed.
• Keep the device and testing supplies away from young children.
Small items such as the battery cover, batteries, test strips, lancets
and vial caps are choking hazards.
• Use of this instrument in a dry environment, especially if synthetic
materials are present (synthetic clothing, carpets etc.) may cause
damaging static discharges that may cause erroneous results.
• Do NOT use this instrument in close proximity to sources of strong
electromagnetic radiation, as these may interfere with the correct
operation.
• Proper maintenance and timely calibration with the control solution
are essential to the longevity of your device. If you are concerned
about the accuracy of the measurement, please contact the place of
purchase or customer service representative for assistance.
KEEP THESE INSTRUCTIONS IN A SAFE PLACE
Important Information
• Severe dehydration and excessive water loss may cause readings
which are lower than actual values. If you believe you are suffering
from severe dehydration, consult a healthcare professional
immediately.
• If your blood glucose results are lower or higher than usual, and you
do not have symptoms of illness, first repeat the test. If you have
symptoms or continue to get results higher or lower than usual,
follow the treatment advice of your healthcare professional.
• Use only fresh whole blood sample to test your blood glucose. Using
other substances will lead to incorrect results.
• If you are experiencing symptoms that are inconsistent with your
blood glucose test results and you have followed all instructions
described in this owner's manual, call your healthcare professional.
• We do not recommend using this product on severely hypotensive
individuals or patients in shock. Readings which are lower
than actual values may occur for individuals experiencing a
hyperglycaemic-hyperosmolar state, with or without ketosis. Please
consult the healthcare professional before use.
• The measurement unit used for indicating the concentration
of blood or plasma glucose can have mg/dL or mmol/L. The
approximate calculation rule for conversion of mg/dL in mmol/L is:
mg/dL
Divided by 18
mmol/L
Times 18
For example:
1) 120 mg/dL ÷ 18 = 6.6 mmol/L
2) 7.2 mmol/L x 18 = 129 mg/dL approximately.
EN-1
ADVANCED pro GD40g Owner's Manual
= mmol/L
= mg/dL
Need help?
Do you have a question about the Advanced pro GD40g and is the answer not in the manual?
Questions and answers