Mount The Cable Management Assembly On Both Nodes; Location Of Serial Number Tag - EMC2 Data Domain DD9500 System Installation And Upgrade Manual
High availability (ha) system
Hide thumbs
Also See for Data Domain DD9500 System:
- Replacement manual (14 pages) ,
- Field replacement unit manual (18 pages)
Table of Contents
Advertisement
Install the System in the Rack.
7. Check the PSNT label at the rear of the chassis.
Figure 27 Location of serial number tag
Repeat these steps to install the second node.
Mount the cable management assembly on both nodes
A cable management assembly (CMA), for organization of cables at the rear of the
system, is already installed onto the DD9500 system on an EMC rack.
For field installed systems, the CMA is shipped separately.
Note
For non-EMC racks, it is acceptable to use the cable management products provided by
the rack vendor.
Mount the cable management assembly on both nodes
41
Advertisement
Table of Contents
Need help?
Do you have a question about the Data Domain DD9500 System and is the answer not in the manual?
Questions and answers