Table of Contents
Advertisement
VIPA System SLIO
Mounting periphery
modules
HB300 | IM | 053-1MT01 | en | 19-40
1.
Before mounting the periphery modules you have to remove the bus cover at the
right side of the bus coupler by pulling it forward. Keep the cover for later mounting.
2.
Mount the periphery modules you want.
3.
After mounting the whole system, to protect the backplane bus connectors at the
last module you have to mount the bus cover, now. If the last module is a clamp
module, for adaptation the upper part of the bus cover is to be removed.
Basics and mounting
Mounting bus coupler
17
Advertisement
Table of Contents
