www.leeandplumpton.co.uk
ASSEMBLY INSTRUCTIONS
RANGE
InMotion Single Electric
REF:
1200, 1400, 1600, 1800mm Wide.
Read this leaflet before
assembly
FIXINGS
Item 1
Item 2
R/0161
F/0415
Motor Bracket
M6x20 Pan Posi Bzp
Qty 2
Qty 4
Item 6
Item 7
F/0453
F/0662
4x25mm Flange Pozi
M6x20 Hexagon Bolt Bzp
Qty 3
Qty 8
TOOLS REQUIRED
• Pozi head screwdriver
• 5mm Allen key
• 6mm Allen key
• 10mm spanner
ASSEMBLY INSTRUCTIONS
STEP 1
A. Attach the long rail to the
desktop using screws (9).
IMPORTANT: There are screw
holes in the rail for cable trays and
these must face towards the back
of the desk. Please ensure that the
holes are positioned as far away
from the underside of the desktop
as possible.
B. Place the motor brackets into
position using screws (2).
Then use socket cap bolts (3)
and socket shoulder screws (4)
to attach each leg column to a
motor bracket and the rail.
2 People
Required
Item 3
F/0663
M8x10 Socket Cap Bolt Bzp
Qty 4
Item 8
F/0475
3-4 x10g Pan Pozi Bzp
Qty 12
BEFORE YOU BEGIN...
• Check you have all the tools and components required
• Keep children and animals away from small parts
• Ensure you have adequate space
• Assemble product on a flat, clean surface
• Apply manual handling guidelines when building this item
A.
4
Long rail
Item 4
F/0664
M8x10 Socket Shoulder Screw
Qty 4
Item 9
F/0591
5x70 Pan Head Bzp
Qty 4
9
B.
3
2
No.126 A/2223 Revision A 08/05/2019
Item 5
A/2219
Cable Clamp
Qty 3
Long rail
1