Summary of Contents for Lee & Plumpton InMotion Double Electric 1200
Page 1
www.leeandplumpton.co.uk ASSEMBLY INSTRUCTIONS RANGE InMotion Double Electric REF: 1200, 1400, 1600, 1800mm Wide. 2 People Read this leaflet before Required assembly FIXINGS Item 1 Item 2 Item 3 Item 4 Item 5 R/0161 F/0415 F/0663 F/0664 A/2219 Motor Bracket M6x20 Pan Posi Bzp M8x10 Socket Cap Bolt Bzp M8x10 Socket Shoulder Screw Cable Clamp...
Page 2
ASSEMBLY INSTRUCTIONS STEP 2 Use the socket cap bolts (3) and socket shoulder screws (4) to attach each leg column to a motor bracket and a rail, taking care to ensure the rails face the correct direction in relation to the desk tops as per the instructions below.
Page 3
ASSEMBLY INSTRUCTIONS STEP 5 Side Plates Secure the left and right side plates into position on the underside of the desk using screws (8). STEP 6 A. Attach the power pack to the underside of the desk using screws (8) (position left or right).
This manual is also suitable for:
Inmotion double electric 1400Inmotion double electric 1600Inmotion double electric 1800