Advertisement
Quick Links
www.leeandplumpton.co.uk
ASSEMBLY INSTRUCTIONS
RANGE
Duty, Crescent with or without Modesty.
REF:
1600mm, 1800mm
Read this leaflet before
assembly
COMPONENT PARTS
Item 1
Crescent Top Panel
Qty 1
Item 6
Back Coner Leg
Qty 1
Item 9 & 10
Item 12
Cable Port
Expander Plate
Qty 4
Qty 4
A/0525 & A/0527
A/1164
Item 18
Item 19
Rail Screw
Grub Screws M8
Qty 12
Qty 8
F/0587
F/0637
* Desk with Modesty Panel only.
2 People
Required
Item 2 *
Modesty Panel
Qty 1
Item 7
Rail
Qty 2
Item 13 *
Modesty Panel Spacer
Qty 15
R/0071
Item 20
5/8" x 8g Pan Pozi BZP
Qty 4
F/0414
Crescent with Modesty shown.
Item 3 *
Short Modesty Panel
Qty 1
Item 8
Short Rail
Qty 2
Item 14 *
Item 15 *
Minifix Bolt Chipfast
Minifix M6
34 x 15
Qty 8
Qty 7
F/0433
F/0508
Item 21
5mm Hole Plugs
Qty 8
A/0518, A/0763,
F/0546
Item 4
Item 5
GoalPost Frame RH
GoalPost Frame LH
Qty 1
Qty 1
Item 16 *
Item 17 *
Minifix Alloy Cams
Cam Cover
18mm
Qty 15
Qty 15
F/0436 F/0446 F/0545
F/0434
F/0575 F/0576 F/0577
No. 110 A/1879 Revision A 10/10/2018
1
Advertisement
Related Manuals for Lee & Plumpton Crescent
Summary of Contents for Lee & Plumpton Crescent
- Page 1 ASSEMBLY INSTRUCTIONS RANGE Duty, Crescent with or without Modesty. REF: 1600mm, 1800mm Read this leaflet before 2 People assembly Required Crescent with Modesty shown. COMPONENT PARTS Item 1 Item 2 * Item 3 * Item 4 Item 5 Crescent Top Panel...
- Page 2 TOOLS REQUIRED BEFORE YOU BEGIN... • Pozi head screwdriver • Check you have all the tools and components required • 4mm Allen Key • Keep children and animals away from small parts • Ensure you have adequate space • Assemble product on a flat, clean surface •...
- Page 3 ASSEMBLY INSTRUCTIONS STEP 4 If a modesty panel is to be fitted, place Cams (16) in the holes in the Modesty Panels (2) & (3). Ensure the arrow on the Cam points to the edge of the panel. Fit the Modesty Panels onto the Bolts/Spacers in the Leg and lock the Cams with just over a half turn.
- Page 4 ASSEMBLY INSTRUCTIONS STEP 7 Slide the brackets on the Legs (4,5) into the open notched ends of the Rails screwed to the Top. If a Modesty Panel is attached, ensure that the Bolts in the Leg are aligned with the appropriate holes in the Modesty Panel.