Important Safety Warnings; Installation - Njoy Code Series User Manual

Back View
Code 800
4
3
Code 1000
4
3
Code 2000
4
1. Output receptacles
2. AC input
04
3 2
1
2
1
2
1
3. USB communication port
4. Ventilation
3

Important Safety Warnings

Please comply with all warnings and operating instructions in this manual
strictly. Save this manual properly and carefully read the following
instructions before installing the unit. Do not operate this unit before
reading through all safety information and operating instructions carefully:
Transportation
•
Please transport the UPS system only in the original package to protect
against shock and impact.
Preparation
•
Condensation may occur if the UPS system is moved directly from cold
to warm environment. The UPS system must be absolutely dry before
being installed. Please allow at least two hours for the UPS system to
acclimate to the environment.
•
Do not install the UPS system near water or in moist environments.
•
Do not install the UPS system where it would be exposed to direct
sunlight or near heat sources.
•
Do not block ventilation holes in the UPS housing.

Installation

•
Do not connect appliances or devices which would overload the UPS
system (e.g. laser printers) to the UPS output sockets.
•
Place cables in such a way that no one can step on or trip over them.
•
Do not connect domestic appliances such as hair dryers to UPS output
sockets.
•
The UPS can be operated by any individuals with no previous experience.
•
Connect the UPS system only to an earthed shockproof outlet which
must be easily accessible and close to the UPS system.
•
Please use only VDE-tested, CE-marked mains cable (e.g. the mains
cable of your computer) to connect the UPS system to the building
wiring outlet (shockproof outlet).
•
Please use only VDE-tested, CE-marked power cables to connect the
loads to the UPS system.
05