Avaya S8700 Manual page 34

Adding new hardware
Hide thumbs Also See for S8700:
Table of Contents

Advertisement

Install and Administer Trunks and Lines
The echo cancellation feature cancels echoes with delays up to 96 milliseconds. Echo cancellation is
disabled automatically when the circuit pack detects a 2100-hertz phase-reversed tone put out by high-
speed modems (56 kilobaud) but not when it detects a 2100-hertz straight tone generated by low-speed
modems (9.6 kilobaud).
For information on installing port circuit packs, refer to
information on setting the option switches, refer to the job aid titled
information on administering the circuit packs, refer to the Administrator's Guide for Avaya
Communication Manage.
Echo cancellation must first be purchased then activated by the license file. Refer to the Administrator's
Guide for the Avaya Communication Manager.
Use the following procedure to modify the settings:
1
Type display system-parameters customer-options and press
DS1 Echo Cancellation? field is set to y . If not, contact your Avaya representative as this
must be set by the license file.
display system-parameters customer-options
Abbreviated Dialing Enhanced List? y
Access Security Gateway (ASG)? n
Analog Trunk Incoming Call ID? y
A/D Grp/Sys List Dialing Start at 01? y
Answer Supervision by Call Classifier? y
Async. Transfer Mode (ATM) PNC? n
Async. Transfer Mode (ATM) Trunking? n
34
NOTE:
You do not need to busyout the circuit packs to modify the settings. But the modified
settings do not take effect until either the port is busied out or the scheduled maintenance
runs.
ARS/AAR Partitioning? y
ARS/AAR Dialing without FAC? y
ASAI Link Core Capabilities? y
ASAI Link Plus Capabilities? y
ATM WAN Spare Processor? n
Attendant Vectoring? y
Install the Circuit Packs
OPTIONAL FEATURES
Audible Message Waiting? y
ARS? y Computer Telephony Adjunct Links? n
Co-Res DEFINITY LAN Gateway? y
Cvg Of Calls Redirected Off-net? y
Digital Loss Plan Modification? n
ATMS? n
DS1 Echo Cancellation? y
on page 14. For
Option Switch Settings
. On screen 2 verify that the
Enter
Page
2 of
Authorization Codes? y
CAS Branch? n
CAS Main? n
Change COR by FAC? n
DCS (Basic)? y
DCS Call Coverage? y
DCS with Rerouting? y
DS1 MSP? y
Adding New Hardware--S8700
November 2003
. For
10

Advertisement

Table of Contents
loading

Table of Contents