Avaya S8700 Manual page 30

Install and Administer IP Connectivity Hardware
4
In their place install the tight-twisted pair I/O cables (700181118) onto the backplane, according
to the proper orientation shown in
Observe the white outline printed on the backplane for the location of each connector.
Figure 4: Fan Assembly Removal
30
NOTE:
When viewed from the "wiring" side of the twin connectors (that is, while plugging them
into the backplane) and with the connectors oriented properly for plug-in, they should look
like Proper Orientation for the Twisted Pair I/O Cables
The circled pin locations are "No-Connects"; that is, they have no wires in them. At the
top there is an orange-black pair on the right and a violet-brown pair on the left.
The 50-position metal shell D connectors should be installed into the connector panel with
the longer side of the D (pins 1–25) toward the right when viewed from the rear of the
media gateway.
fndpremv LJK 102600
Proper Orientation for the Twisted Pair I/O Cables on page 31.
on page 31.
Adding New Hardware--S8700
November 2003