Product Contents; Usage - HOFFEN BT-K01L Instruction Manual

After unpacking, make sure that the packaging contains all the elements listed below. After
unpacking the device, check if it works correctly.
1 x Electric kettle with base
BEFORE USE
When using the product for the first time, it is recommended to clean it by boiling a full
kettle of water, pouring the water away and then repeating the process. The surface should
be cleaned with a moist wipe.
WARNING: the maximum capacity of the kettle is 1.7 l.
1. To fill the kettle, remove it from the power base, open the lid by pressing the button,
pour in the desired amount of cold water and close the lid. The kettle can also be filled
via the spout. The water level should not be filled beyond the level marked as MAX or
below the MIN mark. If there is not enough water in the kettle, it will turn off before
boiling the water.
WARNING: Do not fill the kettle above the maximum level, as the water may spill through
the spout while boiling. Make sure that the lid is properly closed before plugging it to the
power socket.
2. Set the kettle on the power base.
3. Plug the cord into the socket. Turn the kettle on by setting the On/Off switch to the On
position. The water will begin to boil. The kettle will switch off automatically after the
water is boiled. You can stop the process at any moment by moving the On/Off switch
to the Off position. If you want to continue boiling the water, set the On/Off switch to
the On position.
WARNING: Make sure that the lid is properly closed while in use.
4. Lift the kettle from the power base and pour the water where required.
WARNING: handle the kettle with care when pouring water, as boiling water may cause
burns.

7. PRODUCT CONTENTS

8. USAGE

1 x Instruction manual
21