Grundfos Eye - Grundfos Hydro Multi-E Series Installation And Operating Instructions Manual

17. Grundfos Eye

The operating condition of Hydro Multi-E is indicated by Grundfos
Eye on the pump control panels. See fig. 59, pos. A.
Fig. 59 Grundfos Eye
Grundfos Eye
36
A
Indication
No lights are on.
The two opposite green indicator lights are
rotating in the direction of rotation of the
motor when seen from the non-drive end.
The two opposite green indicator lights are
permanently on.
One yellow indicator light is rotating in the
direction of rotation of the motor when seen
from the non-drive end.
One yellow indicator light is permanently on.
Two opposite red indicator lights are flashing
simultaneously.
The green indicator light in the middle
flashes quickly four times.
The green indicator light in the middle
flashes continuously.
The green indicator light in the middle is
permanently on.
The green indicator light in the middle
flashes quickly while Grundfos GO Remote
is exchanging data with the motor. It takes a
few seconds.
Description
The power is off.
The motor is not running.
The power is on.
The motor is running.
The power is on.
The motor is not running.
Warning.
The motor is running.
Warning.
The motor has stopped.
Alarm.
The motor has stopped.
Remote control with Grundfos GO Remote via
radio.
The motor is trying to communicate with Grundfos
GO Remote. The motor is highlighted in the
Grundfos GO Remote display to inform the user
of the location of the motor.
When you have selected the motor in the
Grundfos GO Remote menu, the green indicator
light in the middle flashes continuously. Press
on the pump control panel to allow remote control
and data exchange via Grundfos GO Remote.
Remote control with Grundfos GO Remote via
radio.
The motor is communicating with Grundfos GO
Remote via radio connection.
Remote control with Grundfos GO Remote via
infrared light.
The motor is receiving data from Grundfos GO
Remote via infrared communication.