Omron BU5002R Instruction Manual page 86

3 Checking and starting the operation
3-4 Operations using the LCD menu
☆: Displayed only when the UPS is stopped. Not displayed while the UPS is running.
Control Start Function Test
Reset B.life counter
Load Segments ON/OFF
Reset Power Usage
Dry Contact Test
Initialization ☆
Maintenance Bypass
Settings Local Settings
86
Menu Description
Conducts a simple
self-diagnostic test on
battery deterioration and
shows its result.
Resets the battery life
counter.
The output receptacle of the
UPS can be turned ON/OFF
for each power supply output
group (BU3002R only).
Resets the values for the
cumulative power usage and
average power usage.
Conducts a contact test
when using a contact signal
or I/O card (SC08).
Restores the factory default
settings of the UPS.
Forcibly shifts to the bypass
mode.
Language Selects the language
displayed on the LCD.
LCD Setting Changes the contrast and
brightness of the LCD.
LCD Auto Sets the time until the LCD
OFF automatically turns off.
LCD Test ☆
Checks if the LCD and
LEDs turn on.
Audible Alarm Sets the conditions for the
buzzer to sound.
Value
Start self-diagnostic test
• Battery test: Pass
• Battery test: Fail (Battery not
connected, battery deteriorated)
• Battery test: Cancel
(Operating in battery mode, not
charged adequately)
Execute battery life counter reset
OUT B: ON (factory default)/OFF
OUT C: ON (factory default)/OFF
Execute cumulative power usage
reset
Execute a contact signal test
BU: ON/OFF
BL: ON/OFF
TR: ON/OFF
WB: ON/OFF
Execute settings initialization
Execute maintenance bypass
Display language: Japanese
(factory default), English
Set the LCD (contrast bar and
brightness bar)
LCD Auto OFF: Always ON
(factory default), Auto OFF 30
seconds, Auto OFF 3 minutes
Execute LCD test
Buzzer setting: ON (factory
default), OFF during backup
operation, Always OFF
BU5002R/BU3002R/BU3002RH
Menu type
Standard
Advanced
Standard