Advertisement
When to align the laser:
The Laser Alignment Procedure can be performed if any of the following apply to you.
• You are experiencing a general Loss of Power.
• You are experiencing 'Fading' in one of the corners of the table.
• You are losing power in certain positions on the table.
• You have replaced the X-Axis Rail.
• You have replaced a Laser Tube.
• You have replaced a Mirror or Optic.
• The engraver has been moved or transported.
Before you start...
Direction
Many of the instructions provided in this procedure will have a direction given,
such as left hand side or right hand side. Unless otherwise stated, these are all provided
as though you were facing the machine from the front.
Table Positions
For the following procedures the table will be broken into four (4) positions. Each
position is identified by its relative distance to the laser source and corresponds with the
mirror to adjust for that position.
1
2
Laser Alignment
Fusion CO2
Revision Date: 10/10/2013
3
4
pg. 3 of 18
Advertisement
