Epilog Laser Epilog Fusion CO2 Manual page 15

Procedure C: Perpendicular Alignment
Step 1:
Ensure that the engraver is on and that the Red Dot Pointer is active
Use the Arrow Keys on the engraver's keypad to navigate to Focus mode and double
click the joystick.
Step 2:
Push Down on the joystick to bring the engraver head onto the table. The joystick
is represented by the large circle in the lower left side of the display.
Laser Alignment
Fusion CO2
Revision Date: 10/10/2013
[See A-7].
pg. 15 of 18