Epilog Laser Epilog Fusion CO2 Manual page 13

Step 7: Align mirror 3
Jog the lens carriage to Position 3.
Step 8: Align mirror 3
Locate Mirror #3. Using the 3/32" Allan Wrench, adjust the screws on Mirror #3
so that the Red Dot Pointer is in the center of the alignment target.
Location Of Adjustment Screws
Once complete return to
#2 and #3 until you can jog between them without the Red Dot leaving the Center of the
Alignment Target.
Laser Alignment
Fusion CO2
Revision Date: 10/10/2013
3
[Step 3] and then [Step
X-Axis adjustment Mirror
Adjustment Screw Movement Diagram
5]. Continue to align Mirrors #1,
pg. 13 of 18