Scanning Fire, News, Weather And Private Frequency Banks - Uniden BCT7 Operating Manual

Scanning Fire, News, Weather, and Private Frequency Banks
Note: The Warning Alert does not work while scanning these banks.
To scan Fire frequencies,
press F.
FIRE appears in the display and
scanning begins two seconds later.
To scan your Private frequencies
you have programmed, press
W again.
PRIVATE appears in the display
and scanning begins two seconds
later.
When a transmission is received, the scanner stops on that frequency. When the transmission ends, a built-in two second
delay feature holds the scanner on that frequency for a response. If there is no response, scanning resumes.
14
To scan News frequencies, press
F
again.
NEWS appears in the display and
scanning begins two seconds later.
When the BCT7 receives Fire,
News, Weather, or Private
frequencies, scanning stops and
the active frequency is displayed.
The State Code/Active Bank
Indicators do not appear in these
frequency banks.
To scan Weather Frequencies,
W
press .
WX appears in the display and
scanning begins two seconds later.