NSK Primado2 Operation Manual page 7

2-5 Buttons & Icons
6
Icon
Motor Select Button A
Motor Select Button B
Speed Adjustment Area
Irrrigation Volume
Adjustment Area
Irrigation ON/OFF Button
Track Bar
UP Button
DOWN Button
Rotation Mode Select Button
"Rotating" display
Priming Button
Foot Control Panel
Foot Control ON/OFF Button
Option Set Up Button
Name
Selects the Motor which is connected to Motor
Connector A.
If the Motor is not connected, "Disconnection" is
displayed.
Selects the Motor which is connected to Motor
Connector B.
If the Motor is not connected, "Disconnection" is
displayed.
Rotational speed can be adjusted by the Track
Bar and UP/DOWN Button.
The irrigation volume can be adjusted by the
Track Bar and UP/DOWN Button.
Irrigation is OFF by default. Irrigation is turned
ON by touching the button.
The rotational speed or irrigation volume can be
adjusted by moving the Track Bar to the left or
right.
Increases the rotational speed or irrigation
volume.
Decreases the rotational speed or irrigation
volume.
Changes the Rotation Mode of the Motor
connected to Motor A or B between Forward,
Reverse and Oscillate (P200-WPD only).
Shows that the Motor is rotating.
Whether the Irrigation Mode at ON or OFF, as
long as the Priming Button is kept pushed, the
irrigation volume is at 100% capacity.
Displays the function set up by the individual
buttons of the Foot Control Panel. If the Foot
Control is not connected, only
Default setting : OFF. The Foot Control is turned
ON by pressing the button (see Figure above).
Displays the "Option Set Up" screen.
Descriptions
is displayed.