Specifications - NSK Primado2 Operation Manual

11

Specifications

<Control Unit>
Model
Power source
Electricity consumption
Maximum feed rate of Irrigation Pump
Dimensions
Weight
Length of Power Cord
<Motor>
Model
Rotational speed
Rated input
Dimensions
Weight
Operation time
Length of Motor Cord
<Foot Control>
Model
Dimensions
Weight
Length of Foot Control
Cord
Use Environment
Store and Transportation
Environment
Classifications of equipment
– Class I equipment
– Type BF applied part
– See 8. Sterilization
– Foot Control: IPX8 (Protected against immersion in water)
– Foot Control: AP Equipment
– Intermittent operation
Operation Principal
This system is composed of the Control Unit, the Foot Control, the Motor and the Attachment.
Power is supplied from the Control Unit to the Motor by operating the Foot Control or the Hand Switch of the Motor. Due to the motor rotary,
the Cutting Accessory attached to the Attachment rotates.
P200-CU-120
AC 120V 50/60 Hz
65 VA
75 ml/min
W278×D268×H160 mm
6.9Kg
3.6 m
P200-HMH P200-SMH
P200-HMH-HS P200-SMH-HS
-1
60,000min 80,000min
DC 39.5V DC 23.7V
Ø23×L99 mm Ø18×L99.7 mm
Ø23×L99 mm Ø19.3×L117.5 mm
361g 305g
390g 340g
3 min. ON/10 min. OFF 3 min. ON/10 min. OFF
3.5 m
FC-73 FC-74
W153×D223×H175.5 mm W220×D223×H175.5 mm
1.4Kg 2.0Kg
3.5 m
Temperature
0 - 40˚C (no condensation) 30 - 75
-10 - 50˚C 10 - 85
: Motor, Attachment
P200-BMH
P200-BMH-HS
-1
48,000min
DC 21.8V
Ø18×L100.4 mm
Ø20.2×L101.8 mm
302g
359g
1 min. ON/15 min. OFF
Humidity Atmospheric pressure
RH 700 - 1,060hPa
RH 500 - 1,060hPa
P200-WPD
-1 -1
1,200min
DC 39.1V
W75.5×D28.0
×H141.3 mm
790g
1 min. ON/10 min. OFF
31