Advanced Functions - MOTO GUZZI V7 III Manual

Hide thumbs Also See for V7 III:
Table of Contents

Advertisement

Clock adjustment
In the "CLOCK" function the time can be set. To access this function, long press the
"MODE" button. Each time it is pressed, the hour value changes. When the value of
12 is reached, at the next press, the value returns to 1.
Long pressing the "MODE" button will save the value and switch to the minutes setting
mode.
Each time the "MODE" button is short pressed, the minute value changes. When the
value of 59 is reached, at the next press, the value returns to 0.
02_22
The procedure ends with a long press of the "MODE" button or when the vehicle begins
to travel at a speed higher than 3.11 mph (5 Kph).
IMPORTANT
FOR RIDER AND PASSENGER SAFETY REASONS THESE PROCEDURES ARE
PERMITTED ONLY WITH THE VEHICLE STOPPED.

Advanced Functions (02_23, 02_24, 02_25, 02_26, 02_27)

Trip Fuel "Count of space traveled in reserve"
This function consists in the count and display of the distance traveled in "mi or km"
with the vehicle in fuel reserve.
When the fuel reserve warning light turns on:
after 1.24 mi (2 Km), the "TRIP FUEL" counter will appear on the LCD display;
in any case, you can return to the trip log by pressing the "MODE" button.
If the ignition key is turned to "ON":
02_23
for the first sixty seconds (Reserve sensor stabilization phase) "TRIP FUEL"
is not shown. After this time, "TRIP FUEL" is automatically shown. The pro-
cedure for showing "TRIP FUEL" is as illustrated in the figure:
49

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents