Front Fork Adjustment - MOTO GUZZI V100 Mandello Instruction Manual

Front fork adjustment (03_10, 03_11, 03_12, 03_13, 03_14,

03_15)
Operating the front brake lever, press the handlebar repeatedly to send the fork fully
down. The shock absorber should compress and extend smoothly with no signs of oil
leakage on the stanchions.
Check the tightening of all the elements and the correct operation of the front and rear
suspension joints.
CAUTION
03_10
TO HAVE THE FRONT FORK OIL AND OIL SEALS REPLACED, CONTACT AN
Official Moto Guzzi Dealer.
V 100 MANDELLO
The front suspension consists of a hydraulic fork connected to the headstock by
means of two plates.
The right stem of the fork has an upper nut (2) for adjusting the spring pre-load and
an upper adjustment screw (1) for adjusting the hydraulic braking in rebound.
DO NOT FORCE THE ROTATION OF THE ADJUSTMENT SCREW BEYOND THE
LIMIT STOP IN BOTH DIRECTIONS, IN ORDER TO PREVENT ANY DAMAGE.
03_11
WHEN SPRING PRE-LOAD IS INCREASED, REBOUND DAMPING MUST ALSO
BE INCREASED TO PREVENT EXCESSIVE SUSPENSION KICKBACK WHEN
RIDING.
116