Setting Print Tip Offsets - 3D Systems Cubify CUBEX Duo Replacement Manual

Print jet replacement manual

Hide thumbs Also See for Cubify CUBEX Duo:

5. Slowly raise the print pad until it lifts the new print tip in line with the others. All

three print tips should be touching the bed without putting any pressure on it.

6. Turn the CubeX printer off and unplug it from the mains power supply.

7. Using the 2.5mm hex driver, tighten the print jet holding bolt (pictured) to lock the

print jet in place.

With the print tips levelled you can now turn on the CubeX printer and set the print tip

offsets

Setting Print Tip offsets

See the CubeX user guide for instructions on how to set your print tip offsets.

Table of Contents

Show Quick Links

Do you have a question about the Cubify CUBEX Duo and is the answer not in the manual?

Cubify cubex trio