Making A Call From The Phonebook; Chain Dialing From The Phonebook; Switching To The Handset Speakerphone During A Call; Making A Call With Base Speed Dial - Uniden WDSS 5355 Series Owner's Manual

Making a Call from the Phonebook

1) When the phone is in standby, press
2) Move the cursor to select DIAL/EDIT, and then press
3) Find the phonebook entry you want to call (see Finding a Phonebook Entry on
4) Press [ /flash] or [ ] to dial the number.
Note: You can also press [ /flash] or [
you want to dial, press [select/

Chain Dialing from the Phonebook

You can use the phonebook entries to store a group of numbers (up to twenty digits) that you may need to enter
once your call connects.
1) Dial the number normally.
2) After the call connects, press
3) Use [ ] or [ ] to select the phonebook entry that contains the digits you want to send.
[select/ ].
4) Press

Switching to the Handset Speakerphone During a Call

To switch a normal call to the speakerphone, press [
normal call, press [ ].

Making a Call with Base Speed Dial

1) When the phone is in standby, press
2) Press [memory].
3) Press the number key (
programmed number.
[ ] to open the phonebook.
] before you open the phonebook. When you come to the phone number
].
[ ].
[ ].
[0] through [9]) where the desired phone number is stored. The phone dials the
[select/ ] or [ ] again.
] on the handset. To switch from a speakerphone call to a
28
page 22).