Put Call On Hold; Remove Call From Hold On Current Line; Multiple Calls - Cisco 7931G User Manual

Calling Features
• If you use a shared line, Hold Reversion rings only on the phone that put the call on hold, not on the
• Your system administrator determines the duration between Hold Reversion alerts.
• When a call is chaperoned, the call chaperone cannot use Hold.

Put Call on Hold

Procedure
Step 1 Make sure that the appropriate call is highlighted.
Step 2
Press

Remove Call from Hold on Current Line

Procedure
Step 1 For the flashing held call, press one of the following buttons:
•
•
•
Step 2
If there are multiple held calls, highlight the appropriate call and press Resume or press

Multiple Calls

You can switch between multiple calls on multiple lines.
If you want to...
Switch to a held call on
another line
Switch from a connected
call to answer a ringing
call
other phones that share the line.
.
Then...
Press
Press
Cisco Unified IP Phone 7931G User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
(flashing) for the line that you are switching to.
(flashing). Any active call is placed on hold and the selected call resumes.
Put Call on Hold
.
25