Join Together Existing Calls On Multiple Phone Lines; Meet Me Conference; Start Meet Me Conference - Cisco 7931G User Manual

Meet Me Conference

Join Together Existing Calls on Multiple Phone Lines

Procedure
Step 1
From an active call, press Join. You may need to press more to see Join.
Step 2
Press the green flashing line button
Note
Step 3 If a window opens on your phone screen prompting you to select the calls that you want to join, highlight the
calls, press Select, and then press Join to complete the action.
The calls are joined.
Meet Me Conference
Meet Me conferencing allows you to start or join a conference by calling the conference number.
Tip
• If you call a secure Meet Me conference number from a nonsecure phone, your phone displays the
• A Meet Me conference ends when all participants hang up.
• If the conference initiator disconnects, the conference call continues until all participants hang up.

Start Meet Me Conference

Participants cannot join the conference until the initiator starts the conference.
Procedure
Step 1 Obtain a Meet Me phone number from your system administrator.
Step 2 Distribute the number to participants.
Step 3 When you are ready to start the meeting, go off-hook to get a dial tone, then press MeetMe.
Step 4
Dial the Meet Me conference number.
Participants can now join the conference by dialing the Meet Me number.
Cisco Unified IP Phone 7931G User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
34
If your phone does not support Join for calls on multiple lines, transfer the calls to a single line before
using Join.
message Device Not Authorized. For more information, see
for the calls that you want to include in the conference.
Calling Features
Secure Calls, on page 46.