Do Not Disturb; Turn Dnd On And Off; Set Up Dnd Settings - Cisco 7931G User Manual

Calling Features

Do Not Disturb

Do Not Disturb (DND) turns off all audible and visual notifications of incoming calls. Your system administrator
enables DND on your phone.
When DND and Call Forward are enabled on your phone, calls forwards immediately and the caller does not
hear a busy tone.
DND interaction with other types of calls includes:
• DND does not affect intercom calls or nonintercom priority calls.
• If both DND and AutoAnswer are enabled, only intercom calls autoanswer.
• When you switch an in-progress call from your mobile phone to Cisco Unified phones that share the

Turn DND On and Off

Procedure
Step 1
To turn DND on, press DND.
Do Not Disturb displays on the phone, the DND lights
Step 2 To turn DND off again, press DND.

Set Up DND Settings

If your system administrator configured DND settings to appear on the User Options page, perform these
steps:
Procedure
Step 1 Log in to your User Options web pages.
Step 2 From the drop-down menu, choose User Options > Device.
Step 3 You can set the following options:
• Do Not Disturb: Set to enable/disable DND.
• DND Option: Choose either Call Reject (to turn off all audible and visual notifications) or Ringer Off
• DND Incoming Call Alert (applies to either DND option set): Set the alert to beep only, flash only,
same line (Session Handoff), the phone disables the DND feature. The DND feature returns when the
call ends.
(to turn off only the ringer).
disable the alert, or choose "None" (to use the "Alert" setting configured by your system administrator).
Cisco Unified IP Phone 7931G User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

Do Not Disturb

(solid), and the ringtone turns off.
31