1-2.2 Psu Led - Infortrend EonStor CS Maintenance Manual

1-2.2 PSU LED

When the power supply LED shows amber, please reference to the following table about which situation the CS is.
Please replace the faulty module. When you see the LED lights amber and flashing, please check if there is any high
temperature environmental issue. Kindly contact Infortrend if you still cannot solve the issue.

Click here if you need to replace the PSU and Cooling module for CS.
Color/Status
OFF
Installation Guide
EonStor CS Installation Guide
PSU LED (for CS 3016/3024/4016/4024/4025B)
The system is connected to the power source but the system is not
turned on.
The PSU is operating normally.

The PSU is faulty.

Over Voltage Protection (OVP)/Over Power Protection (OPP)/Over
Current Protection (OCP) is activated.

The fan built with the PSU is faulty.
The system is not connected to the power.
PSU LED (for CS 2060/3060/4060)
Description
page 18 / 133