Emergency Lid Release - Labnet Prism R User Manual

short-run of set speed. The short-run will stop if the
released.
Note:
1. For safety reasons, the
inactivated when the lid is open. A symbol "
flashing until the lid is closed.

Emergency Lid Release

3.6.
When the lid can't be opened by pressing the
open the lid manually. First, turn off the power of the centrifuge.
Second, use a flat-head screw driver or other tool to remove the
Emergency Lid Release Plug ( Please refer Figure 2 ) on the
right-hand side of the machine. Third, pull the wire (attached to the
plug) while gently pushing downward on the lid. The lid willnow
release.
Prism R™ Refrigerated Microcentrifuge
(START/STOP) knob will be
button, users can
button is
" will be
7