Snmp Agent - Weidmuller IE-WL-BL-AP-CL User Manual

Wi-Fi device IE-WL-BL-AP-CL
TCP/UDP port filters
Setting
Enable
Disable
Policy
Setting
Accept
Drop
ATTENTION
Be careful when you enable the filter function:
Drop + "no entity on list is activated" = all packets are allowed
Accept + "no

SNMP Agent

The IE-WL-BL-AP-CL supports SNMP V1/V2c/V3. SNMP V1 and SNMP V2c use a community string match for
authentication, which means that SNMP servers access all objects with read-only or read/write permissions
using the community string public/private (default value). SNMP V3, which requires you to select an
authentication level of MD5 or SHA, is the most secure protocol. You can also enable data encryption to
enhance data security.
SNMP security modes and security levels supported by the IE-WL-BL-AP-CL are shown in the following table.
Select the security mode and level that will be used to communicate between the SNMP agent and manager.
Protocol Setting on
Version UI web page
SNMP V1, V2c
V1, V2c Read
Community
V1, V2c
Write/Read
Community
SNMP V3 No-Auth
Description
Enables TCP/UDP port filters
Disables TCP/UDP port filters
Description
Only the packets fitting the entities on list can be allowed.
Any packet fitting the entities on list will be denied.
entity on list is activated" = all packets are denied
Authentication
Type
Community string No
Community string No
No
Data Method
Encryption
Use a community string match for
authentication
Use a community string match for
authentication
No Use account with admin or user to access
objects
3-40
Web Console Configuration
Factory Default
Disable
Factory Default
Drop