Weidmuller IE-WL-BL-AP-CL User Manual page 41

Wi-Fi device IE-WL-BL-AP-CL
MD5 or SHA
MD5 or SHA
The following parameters can be configured on the SNMP Agent page. A more detailed explanation of each
parameter is given below the following figure.
SNMP agent
Setting
Enable
Disable
Remote management
Setting
Enable
Disable
Read community (for V1, V2c)
Setting
V1, V2c Read
Community
Write community (for V1, V2c)
Setting
V1, V2c Read /Write
Community
Authentication No
based on MD5 or
SHA
Authentication Data
based on MD5 or encryption
SHA key
Description
Enables SNMP agent
Disables SNMP agent
Description
Allow remote management via SNMP agent
Disallow remote management via SNMP agent
Description
Use a community string match with a maximum of 31
characters for authentication. This means that the SNMP agent
can access all objects with read-only permissions using this
community string.
Description
Use a community string match with a maximum of 31
characters for authentication. This means that the SNMP agent
can accesses all objects with read/write permissions using this
community string.
3-41
Web Console Configuration
Provides authentication based on HMAC-MD5,
or HMAC-SHA algorithms. 8-character
passwords are the minimum requirement for
authentication.
Provides authentication based on HMAC-MD5
or HMAC-SHA algorithms, and data encryption
key. 8-character passwords and a data
encryption key are the minimum requirements
for authentication and encryption.
Factory Default
Disable
Factory Default
Disable
Factory Default
public
Factory Default
private