Wi-Fi device IE-WL-BL-AP-CL
First-time Installation and Configuration
Before installing the IE-WL-BL-AP-CL, make sure that all items in the Package Checklist are in the box. You will
need access to a notebook computer or PC equipped with an Ethernet port. The IE-WL-BL-AP-CL has a default
IP address that must be used when connecting to the device for the first time.
•
Step 1: Select the power source.
The IE-WL-BL-AP-CL can be powered by a DC power input. The device will use whichever power source you
choose.
•
Step 2: Connect the IE-WL-BL-AP-CL to a notebook or PC.
Since the IE-WL-BL-AP-CL supports MDI/MDI-X auto-sensing, you can use either a straight-through cable
or crossover cable to connect the device to a computer. The LED indicator on the device's LAN port will light
up when a connection is established.
•
Step 3: Set up the computer's IP address.
Choose an IP address on the same subnet as the IE-WL-BL-AP-CL. Since the device's default IP address is
192.168.1.110, and the subnet mask is 255.255.255.0, you should set the IP address of the computer
to 192.168.1.xxx.
NOTE
After you select Maintenance Load Factory Default and click the Submit button, the IE-WL-BL-AP-CL
will be reset to factory default settings and the IP address will be reset to 192.168.1.110.
•
Step 4: Use the web-based manager to configure the IE-WL-BL-AP-CL
Open your computer's web browser and type http://192.168.1.110 in the address field to access the
homepage of the web-based Network Manager. Before the homepage opens, you will need to enter the user
name and password as shown in the following figure. For first-time configuration, enter the default user
name and password and then click on the Login button:
NOTE
Default user name and password:
User Name:
Password:
For security reasons, we strongly recommend changing the default password. To do so, select Maintenance
Password, and then follow the on-screen instructions to change the password.
admin
Detmold
2-13
Getting Started