E-Mail Notifications - Weidmuller IE-WL-BL-AP-CL User Manual

Wi-Fi device IE-WL-BL-AP-CL
Syslog server 1/ 2/ 3
Setting
IP address
Syslog port
Setting
Port destination
(1 to 65535)
NOTE RSSI report events (Only for Client mode) event type is useful for the site survey stage. However, this
function increases the traffic load because it needs to use a special utility to retrieve the RSSI values in a
tabular format. So, we recommend disabling this function during normal usage.

E-mail Notifications

Notification Event Types
Check the Active box next to the event type to enable the event type for email notification. By default, all event
types are deactivated (unchecked).
E-mail Server Settings
You can set up to 4 e-mail addresses to receive alarm emails from the IE-WL-BL-AP-CL. The following
parameters can be configured on the E-mail Server Settings page. In addition, a Send Test Mail button can
be used to test whether the Mail server and e-mail addresses work well. More detailed explanations about these
parameters are given after the following figure.
Mail server (SMTP)
Setting
IP address
Description
Enter the IP address of the 1st/ 2nd/ 3rd Syslog Server
Description
Enter the UDP port of the corresponding Syslog server
Description
The IP Address of your email server.
3-45
Web Console Configuration
Factory Default
None
Factory Default
514
Factory Default
None