Weidmuller IE-WL-BL-AP-CL User Manual page 37

Wi-Fi device IE-WL-BL-AP-CL
The IE-WL-BL-AP-CL can act as a simplified DHCP server and easily assign IP addresses to your DHCP clients
by responding to the DHCP requests from the client ends. The IP-related parameters you set on this page will
also be sent to the client.
You can also assign a static IP address to a specific client by entering its MAC address. The IE-WL-BL-AP-CL
provides a Static DHCP mapping list with up to 16 entities. Be reminded to check the Active check box for
each entity to activate the setting.
You can check the IP assignment status under Status  DHCP Client List.
DHCP server
Setting
Enable
Disable
Default gateway
Setting
IP address of a default
gateway
Subnet mask
Setting
subnet mask
Primary/ Secondary DNS server
Setting
IP address of Primary/
Secondary DNS server
Start IP address
Setting
IP address
Description
Enables IE-WL-BL-AP-CL as a DHCP server
Disable DHCP server function
Description
The IP address of the router that connects to an outside
network
Description
Identifies the type of sub-network (e.g., 255.255.0.0 for a
Class B network, or 255.255.255.0 for a Class C network)
Description
The IP address of the DNS Server used by your network. After
entering the DNS Server's IP address, you can use URL as well.
The Secondary DNS server will be used if the Primary DNS
server fails to connect.
Description
Indicates the IP address which IE-WL-BL-AP-CL can start
assigning
3-37
Web Console Configuration
Factory Default
Disable
Factory Default
None
Factory Default
None
Factory Default
None
Factory Default
None