Misc. Settings; Troubleshooting - Weidmuller IE-WL-BL-AP-CL User Manual

Wi-Fi device IE-WL-BL-AP-CL
NOTE If the Password-strength test option is enabled, you will be prompted to use passwords that adhere to the
following password policy:
• The password must contain at least one digit: 0, 1, 2, ..., 9.
• The password must contain both upper and lower case letters:
• A, B, ..., Z, a, b, ..., z.
• The password must contain at least one of the following special characters:
• ~!@#$%^&-_|;:,.<>[]{}
• The password must have more characters than the minimum password length (default = 4).

Misc. Settings

Additional settings to help you manage your IE-WL-BL-AP-CL are available on this page.
Reset button
Setting
Always Enable
Disable the Factory
Reset Function after 60
Seconds

Troubleshooting

This feature allows you to quickly obtain the current system status and provide diagnostics information to
Weidmüller engineers.
To export the current device information, click Export.
For cases where advanced troubleshooting is required, contact a Weidmüller engineer who can provide you
with an encrypted script file. The encrypted script file can capture additional details on the system.
To run the script, browse to and select the script file using Browse and click Run Script after you have filled
in the following details:
Description
The device's Reset button works normally.
The device's reset to default function will be inactive 60
seconds after the IE-WL-BL-AP-CL finishes booting up.
3-55
Web Console Configuration
Factory Default
Always enable