Table of Contents
Advertisement
Wi-Fi device IE-WL-BL-AP-CL
1st / 2nd trap version
Setting
V1
V2
1st / 2nd trap server IP/name
Setting
IP address or host
name
1st / 2nd trap community
Setting
Max. of 31 characters
Status
Wireless LAN Status
The status for 802.11 Information parameters, such as Operation mode and Channel, are shown on the
Wireless Status page. The status will refresh every 5 seconds if the Auto Update box is checked.
Certain values for 802.11 Information might not be displayed based on the different operation modes
selected. For example, the Current BSSID, Signal strength, and SNR parameters are not available in the AP
mode.
It is helpful to use the continuously updated information on this page, such as Signal strength, Noise floor,
and SNR, to monitor the signal strength of the IE-WL-BL-AP-CL in Client mode.
Description
SNMP trap defined in SNMPv1
SNMP trap defined in SNMPv2
Description
Enter the IP address or name of the trap server used by your
network.
Description
Use a community string match with a maximum of 31
characters for authentication.
3-47
Web Console Configuration
Factory Default
V1
Factory Default
None
Factory Default
Alert
Hide quick links:
Advertisement
Table of Contents
