Weidmuller IE-WL-BL-AP-CL User Manual page 30

Wi-Fi device IE-WL-BL-AP-CL
* This option is available for legacy mode in AP/Master only, and does not support AES-enabled clients.
Primary/Secondary RADIUS server IP
Setting
The IP address of
RADIUS server
Primary/Secondary RADIUS port
Setting
Port number
Primary/ Secondary RADIUS shared key
Setting
Max. of 31 characters
Key renewal
Setting
60 to 86400 seconds
(1 minute to 1 year)
WPA/WPA2-Enterprise (for Client)
When used as a client, the IE-WL-BL-AP-CL can support three EAP methods (or EAP protocols): EAP-TLS,
EAP-TTLS, and EAP-PEAP, corresponding to WPA/WPA2-Enterprise settings on the AP side.
Encryption method
Setting
TKIP**
AES
**This option is only available with 802.11a/b/g standard.
EAP protocol
Setting
TLS
TTLS
PEAP
Before choosing the EAP protocol for your WPA/WPA2-Enterpise settings on the client end, please contact the
network administrator to make sure the system supports the protocol on the AP end. Detailed information on
these three popular EAP protocols is presented in the following sections.
EAP-TLS
TLS is the standards-based successor to Secure Socket Layer (SSL). It can establish a trusted communication
channel over a distrusted network. TLS provides mutual authentication through certificate exchange. EAP-TLS
Description
Specifies the delegated RADIUS server for EAP
Description
Specifies the port number of the delegated RADIUS server
Description
The secret key shared between AP and RADIUS server
Description
Specifies the time period of group key renewal
Description
Temporal Key Integrity Protocol is enabled
Advance Encryption System is enabled
Description
Specifies Transport Layer Security protocol
Specifies Tunneled Transport Layer Security
Specifies Protected Extensible Authentication Protocol, or
Protected EAP
3-30
Web Console Configuration
Factory Default
None
Factory Default
1812
Factory Default
None
Factory Default
3600 (seconds)
Factory Default
AES
Factory Default
TLS