Snmp Agent - Weidmuller IE-WL-VL-AP-BR-CL User Manual

Wi-Fi device IE-WL-VL-AP-BR-CL
NAT
Setting
Enable/Disable
Port Forwarding
Active: Click the checkbox to enable Port Forwarding rule(s).
Protocol: Specifies the communication protocol.
WAN Port: Specifies the external port to be forwarded to.
LAN IP: Specifies the "forward to" LAN IP.
LAN Port: Specifies the "forward to" LAN Port.

SNMP Agent

The IE-WL-VL-AP-BR-CL supports SNMP V1/V2c/V3. SNMP V1 and SNMP V2c use a community string match for
authentication, which means that SNMP servers access all objects with read-only or read/write permissions
using the community string public/private (default value). SNMP V3, which requires you to select an
authentication level of MD5 or SHA, is the most secure protocol. You can also enable data encryption to
enhance data security.
SNMP security modes and security levels supported by the IE-WL-VL-AP-BR-CL are shown in the following table.
Select the security mode and level that will be used to communicate between the SNMP agent and manager.
Protocol Setting on
Version UI web page
SNMP V1, V2c
V1, V2c Read
Community
V1, V2c
Write/Read
Community
SNMP V3 No-Auth
MD5 or SHA
MD5 or SHA
The following parameters can be configured on the SNMP Agent page. A more detailed explanation of each
parameter is given below the following figure.
Description
Enables or disables the NAT translation
Authentication Data
Type Encryption
Community string No
Community string No
No No
Authentication No
based on MD5 or
SHA
Authentication Data
based on MD5 or encryption
SHA key
3-51
Web Console Configuration
Method
Use a community string match for
authentication
Use a community string match for
authentication
Use account with admin or user to access
objects
Provides authentication based on HMAC-MD5,
or HMAC-SHA algorithms. 8-character
passwords are the minimum requirement for
authentication.
Provides authentication based on HMAC-MD5
or HMAC-SHA algorithms, and data encryption
key. 8-character passwords and a data
encryption key are the minimum requirements
for authentication and encryption.
Factory Default
Disable