Packet Filters - Weidmuller IE-WL-BL-AP-CL User Manual

Wi-Fi device IE-WL-BL-AP-CL
Maximum number of users
Setting
1 to 999
Client lease time
Setting
2 to 14400 minutes

Packet Filters

The IE-WL-BL-AP-CL includes various filters for IP-based packets going through LAN and WLAN interfaces.
You can set these filters as a firewall to help enhance network security.
MAC Filters
The IE-WL-BL-AP-CL's MAC filter is a policy-based filter that can allow or filter out IP-based packets with
specified MAC addresses. The IE-WL-BL-AP-CL provides 8 entities for setting MAC addresses in your filtering
policy. Remember to check the Active check box for each entity to activate the setting.
MAC filters
Setting
Enable
Disable
Policy
Setting
Accept
Drop
ATTENTION
Be careful when you enable the filter function:
Drop + "no entity on list is activated" = all packets are allowed
Accept + "no
IP Protocol Filters
The IE-WL-BL-AP-CL's IP protocol filter is a policy-based filter that can allow or filter out IP-based packets with
specified IP protocol and source/destination IP addresses.
Description
Specifies how many IP address can be assigned continuously
Description
The lease time for which an IP address is assigned. The IP
address expires after the lease time is completed.
Description
Enables MAC filters
Disables MAC filters
Description
Only the packets fitting the entities on list can be allowed.
Any packet fitting the entities on list will be denied.
entity on list is activated" = all packets are denied
3-38
Web Console Configuration
Factory Default
None
Factory Default
14400 minutes
(10 days)
Factory Default
Disable
Factory Default
Drop