Functional Design; Device Ports; Led Indicators - Weidmuller IE-WL-BL-AP-CL User Manual

Wi-Fi device IE-WL-BL-AP-CL

Functional Design

Device Ports

The IE-WL-BL-AP-CL comes standard with 1 Gigabit port (Ethernet RJ45). The LAN LED will light up when the
LAN cable is inserted.

LED Indicators

The LEDs on the front panel of the IE-WL-BL-AP-CL provide a quick and easy means of determining the current
operational status and wireless settings.
The FAULT LED indicates system failures and user-configured events. If the device cannot retrieve the IP
address from a DHCP server, the FAULT LED will blink at one second intervals. The SIGNAL LEDs indicate
signal strength, and only operate in Client mode.
The following table summarizes how to read the device's wireless settings from the LED displays.
Serial (RS232) configuration console port
RJ45 Ethernet port (10/100/1000 BaseTX)
Fault LED
Signal strength LEDs
2-10
Getting Started